PPWR Article 12: what the labelling obligations require — and from when
Article 12 of the PPWR governs the labelling of packaging in twelve paragraphs — from the harmonised material label and the mandatory QR code for reusable packaging to the ban on misleading symbols. Here is every obligation on economic operators with its paragraph and date. And, put in context, what already applies: harmonised labelling did not become mandatory on 12 August 2026 — the declaration of conformity and technical documentation did.
Hendrik Schulze·Stand: November 2026
Straight to the templates and checklistWhat Article 12 requires: every obligation
Article 12 is the labelling article of Regulation (EU) 2025/40 — twelve paragraphs that set out what must go on packaging, how it is affixed, what is prohibited and which exemptions apply. The table lists every rule addressed to economic operators with its paragraph, date and status — the Commission’s mandates under paras 6 and 7 follow below it. Verbatim passages are in quotation marks; the “Status” column states whether the content is already in the Regulation or only becomes concrete with the Commission’s implementing act.
| Obligation | Paragraph | Applies from / trigger | Status |
|---|---|---|---|
| What must go on the packaging | |||
| Harmonised label “containing information on its material composition in order to facilitate consumer sorting” — it “shall be based on pictograms and be easily understandable, including for persons with disabilities”. On scope, verbatim: “With the exception of e-commerce packaging, this obligation does not apply to transport packaging or to packaging that is subject to a deposit and return system.” Pictograms and format arrive only with the implementing act. | Art. 12(1), first subparagraph | 12 Aug 2028 or 24 months from entry into force of the implementing acts (paras 6/7) — whichever is later | pending act |
| Additional statements for compostable packaging under Art. 9(1) (and, where applicable, Art. 9(2)): the label “shall indicate that the material is compostable, that it is not suitable for home composting and that compostable packaging is not to be discarded in nature”. | Art. 12(1), first subparagraph | as above | pending act |
| Packaging containing substances of concern “shall be marked by means of standardised, open, digital-marking technologies”. Minimum content per para 7: “the name and concentration of the substance of concern present in each material in a packaging unit”. | Art. 12(1), second subparagraph | Methodology via implementing act, Commission deadline 1 Jan 2030 (para 7) | pending act |
| Reusable packaging: a label “informing users that the packaging is reusable” plus a QR code or other standardised, open, digital data carrier with information on the re-use system and collection points that “facilitates the tracking of the packaging and the calculation of trips and rotations” (or, if not feasible, an average estimation) — and reusable sales packaging “clearly identified and distinguished from single-use packaging at the point of sale”. Here the QR code is mandatory, not optional. | Art. 12(2) | 12 Feb 2029 or 30 months from entry into force of the implementing act (para 6) — whichever is later | pending act |
| Exemption from reusable-packaging labelling: “open loop systems which do not have a system operator in accordance with Annex VI”. | Art. 12(3) | tied to para 2 | if applicable |
| Voluntary claims on the share of recycled content on packaging “to which Article 7 applies” (methodology under Art. 7(8)), and claims on biobased plastic content, must comply with the specifications of the implementing act. Existing recycled-content claims on artwork are then permitted only in the prescribed format. | Art. 12(4) | recycled content: 12 Aug 2028 or 24 months from entry into force (para 6), whichever is later; biobased claim: no date of its own — in each case only where such a claim is made | if applicable |
| Packaging under deposit and return systems per Art. 50(1) “shall be marked with a clear and unambiguous label”; in addition, a harmonised colour label from the implementing act may be added, which Member States may make mandatory — provided this causes no internal-market distortions or trade barriers. | Art. 12(1), fourth subparagraph | national deposit label: now; colour label: with the implementing act (para 6) | in the text |
| How it is affixed | |||
| Labels and QR code “shall be affixed, printed or engraved visibly, legibly and firmly on the packaging, so that they cannot be easily erased”; the information “shall also be available to end users before the purchase of the product through online sales”. Cascade where affixing is not possible or warranted: grouped packaging, then “a single electronically readable code”. Rules out easily removable stickers; also affects shop and master data. | Art. 12(5), first subparagraph | with the respective date under paras 1, 2 and 4 | in the text |
| Language: the information “shall be made available in one or more languages which can be easily understood by end users, as determined by the Member State in which the packaging is to be made available on the market”. | Art. 12(5), second subparagraph | with paras 1, 2 and 4 | in the text |
| Where information is provided electronically: personal data only for the limited purpose of giving access to compliance information, in respect of Art. 5(1) GDPR; the information “shall not be displayed with other information intended for sales or marketing purposes”. The compliance QR code is not a marketing channel. | Art. 12(5), third subparagraph, points (a) and (b) | as soon as information is provided electronically | in the text |
| Single-data-carrier principle: where Union law requires a data carrier for the packaged product, “a single data carrier shall be used for providing the information required for the packaged product and for the packaging, and both shall be easily distinguishable”. | Art. 12(5), fourth subparagraph | — | in the text |
| What is prohibited or merely permitted | |||
| Prohibition on “labels, marks, symbols or inscriptions that are likely to mislead or confuse consumers or other end users with respect to the sustainability requirements for packaging, other packaging characteristics or packaging waste management options for which harmonised labelling has been laid down in this Regulation”. The Commission “shall, where appropriate, adopt guidelines”. | Art. 12(8) | no date of its own → formally since the Regulation’s date of application, 12 Aug 2026 (Art. 71) | applies |
| EPR identification: packaging included in an extended producer responsibility scheme “may be identified” — “only by means of a corresponding symbol in a QR code or other standardised, open, digital-marking technology”. The symbol “shall be clear and unambiguous and shall not mislead consumers or other end users as to the recyclability or reusability of the packaging”. A “may” provision; if identified, then digitally only. | Art. 12(9) | EN: “By 12 February 2027” — DE: “Ab dem 12. Februar 2027” (from) — FR: “Au plus tard le 12 février 2027” | option |
| Voluntary QR code or other open digital data carrier in addition to the harmonised label, containing “information on the destination of each separate component of the packaging”. A supplement, not a substitute for the pictogram. | Art. 12(1), third subparagraph | optional, tied to para 1 | option |
| Deposit and return systems other than Art. 50(1): a symbol under national law is permitted. “Member States shall not prohibit the affixing of labels related to deposit and return systems in place in other Member States.” | Art. 12(10) | — | in the text |
| Exemptions and transition | |||
| Sectoral exemption for immediate and outer packaging under Regulations (EU) 2017/745, 2017/746, 2019/6 and Directive 2001/83/EC — only “if there is no space on the packaging due to other labelling requirements” or if labelling “could jeopardise the safe use of medicinal products for human use or of veterinary medicinal products”. Not a blanket exemption; to be justified per packaging item. | Art. 12(11) | — | if applicable |
| Grandfathering: packaging “manufactured in the Union or imported before the deadlines” that does not comply “may be made available on the market until 3 years from the date of entry into force of the labelling requirements”. The reference date is manufacture or import, not the order. | Art. 12(12) | 3 years from entry into force of the respective requirement (paras 1, 2, 4) | in the text |
| The previous material-identification rule in Art. 8(2) of Directive 94/62/EC continues to apply — “until 30 months from the date of entry into force of the implementing act adopted pursuant to Article 12(6)”. No labelling vacuum in 2026. | Art. 70(1)(a) | since 12 Aug 2026, until 30 months after entry into force of the implementing act | applies |
| Decision 97/129/EC “is repealed with effect from 12 August 2028”; according to recital 74 its content is to be carried over into the implementing act. | Art. 70(2) | 12 Aug 2028 | in the text |
What the Commission has to deliver
Three mandates to the Commission determine when the obligations above become concrete — and are not themselves obligations on companies. By 12 August 2026, implementing acts to establish the harmonised label and “specifications for the labelling requirements and formats, including where provided through digital means”, for the labelling under paras 1, 2 and 4 (para 6). By the same date, the methodology for identifying material composition by digital means (para 7). By 1 January 2030, the methodology for substances of concern, including at least “the name and concentration of the substance of concern” per material (para 7). In addition, also by 12 August 2026, the labelling of waste receptacles, which “shall correspond to the labelling for packaging as referred to in Article 12(6)” — except for deposit packaging (Art. 13(2)).
Status November 2026: the 12 August 2026 deadline has passed without the implementing acts appearing in the Official Journal; trade press reported the missed deadline on 19 August 2026; no new date is officially known. Legally, something concrete follows: because paras 1 and 2 are tied to the entry into force of the acts and the later date always prevails, 12 August 2028 and 12 February 2029 are already overtaken as effective dates.
What applies when — and what does not in 2026
Of the rules above, those without a date of their own are formally applicable since 12 August 2026, following the Regulation’s date of application (Art. 71): above all the ban on misleading labels under para 8, alongside the single-data-carrier principle (para 5, fourth subparagraph) and the deposit rules in para 10. None of them puts anything on the packaging. Harmonised labelling did not become mandatory that day. What has applied since then is the declaration of conformity and technical documentation per packaging — an information duty towards authorities, not a specification for what is printed.
The labelling-relevant dates at a glance — two of them are not fixed dates but floors:
| Date | What applies | For labelling |
|---|---|---|
| 12 Aug 2026 | PPWR date of application (Art. 71): declaration of conformity and technical documentation per packaging. Of Article 12, the ban on misleading labels becomes applicable (para 8). Also the Commission’s deadline for the implementing acts on labelling and the digital methodology (paras 6, 7) — missed. Art. 8(2) of Directive 94/62/EC continues to apply (Art. 70(1)(a)). | No harmonised labelling obligation; rules without a date of their own (above all para 8) formally applicable |
| 12 Feb 2027 | Packaging included in an EPR scheme may be identified — only digitally via a QR code or comparable standardised, open, digital-marking technology; the symbol must be clear and unambiguous (Art. 12(9)). | Possible nationally, not mandatory EU-wide |
| 12 Aug 2028 | Harmonised labelling of material composition (para 1) and format rules for recycled-content claims (para 4) — at the earliest. Repeal of Decision 97/129/EC (Art. 70(2)). Receptacle labelling by Member States (Art. 13(1)). | Moves if the implementing act enters into force later — which, after the missed Commission deadline, it will |
| 12 Feb 2029 | Labelling of reusable packaging with a QR code or other standardised, open, digital data carrier (para 2) — at the earliest. | 30 months from entry into force of the implementing act, if later |
| 1 Jan 2030 | Commission deadline for the methodology on digital identification of substances of concern (para 7). | Commission deadline, no obligation on companies |
Reading note: the trigger for the 24- and 30-month periods in Art. 12 is the entry into force of the implementing act, not its adoption (Art. 13(1), by contrast, runs from adoption). Stock manufactured in the Union or imported before the respective deadline may be made available for up to three years from entry into force of the requirement (Art. 12(12)).
Harmonised material labelling (para 1)
The aim: consumers across Europe should recognise from the same information which waste stream a piece of packaging belongs to — instead of 27 national symbol systems. The label “shall be based on pictograms and be easily understandable, including for persons with disabilities”. The date: 12 August 2028 or 24 months from entry into force of the implementing acts, whichever is the latest. Since the Commission missed its deadline, the second date is the governing one.
Who is covered is settled by the wording itself: “With the exception of e-commerce packaging, this obligation does not apply to transport packaging or to packaging that is subject to a deposit and return system.” E-commerce shipping packaging is therefore covered — unlike other transport packaging. For compostable packaging under Art. 9(1) (and, where applicable, Art. 9(2)), three mandatory statements are added: compostable, not suitable for home composting, not to be discarded in nature.
Labels “shall be affixed, printed or engraved visibly, legibly and firmly on the packaging, so that they cannot be easily erased” (para 5) — which rules out loose stickers and affects printing processes, varnishing and sleeves. The information must be available in online sales before the purchase; that is a requirement on shop and master data, not on the packaging. Where affixing is not possible or warranted because of the nature and size of the packaging, the cascade applies: grouped packaging, then a single electronically readable code.
Until the obligation takes effect there is no vacuum: the previous material-identification rule in Art. 8(2) of Directive 94/62/EC continues to apply until 30 months from entry into force of the implementing act (Art. 70(1)(a)). And whoever manufactures or imports before the deadline is grandfathered — for up to three years from entry into force of the requirement (para 12).
Practically, that carries an uncomfortable consequence: the binding design comes exclusively through the implementing act (para 6) — and that act is overdue. Anyone fixing symbols today is fixing them on the basis of drafts. With templates circulating as “PPWR labelling”, it is always worth checking the date and the source.
For packaging with long development or tooling cycles, the sensible response is not to wait but to reserve space: plan labelling areas into the design, and clarify with suppliers how quickly print artwork can change without replacing the tooling.
QR code and digital labelling (paras 1, 2, 5, 9)
On QR codes, the notion of an EU-wide obligation for every piece of packaging is widespread. The Regulation instead knows four different cases, which the market regularly conflates:
- Mandatory for reusable packaging (para 2): from 12 February 2029 — or 30 months from entry into force of the implementing act, whichever is later — reusable packaging must, alongside the reusability label, bear a QR code or other standardised, open, digital data carrier. It informs about the re-use system and collection points and “facilitates the tracking of the packaging and the calculation of trips and rotations” — or, if not feasible, an average estimation. Open loop systems without a system operator under Annex VI are exempt (para 3). For reusable pools this means a serialisable labelling concept plus data keeping for rotation counts.
- Option for EPR (para 9): by 12 February 2027, packaging included in an extended producer responsibility scheme may be identified — and if so, digitally only: “only by means of a corresponding symbol in a QR code or other standardised, open, digital-marking technology”. The symbol must be clear and unambiguous and must not mislead as to recyclability or reusability. It is an option, not an obligation. One detail that matters for multi-market rollouts: the English text reads “By 12 February 2027”, the German “Ab dem 12. Februar 2027” (from), the French “Au plus tard le 12 février 2027” — all language versions are equally authentic, and no interpretation of the divergence exists.
- Rules for the digital channel (para 5): where information is provided electronically, personal data may be collected only for the limited purpose of access to compliance information, in respect of Art. 5(1) GDPR, and the information “shall not be displayed with other information intended for sales or marketing purposes”. The compliance QR code is therefore not a marketing channel — sorting information and campaign landing page should be kept separate. Where Union law requires a data carrier for the packaged product, “a single data carrier shall be used” for product and packaging information.
- Voluntary — and digitally mandatory for substances (para 1): in addition to the harmonised label, economic operators may place a QR code containing “information on the destination of each separate component of the packaging” — a supplement, not a substitute for the pictogram (third subparagraph). Packaging containing substances of concern, by contrast, must be marked digitally; the Commission sets the methodology by 1 January 2030 (second subparagraph, para 7).
For companies placing packaging on the market in several EU countries, the point from para 9 remains the relevant one: EPR identification is tied to the EPR scheme that applies in each Member State — practice can therefore diverge between countries. If you place packaging on the market in more than one country, track this option per target market.
Boundaries: EPR, digital product passport, deposits and receptacles
Four topics get regularly conflated with PPWR labelling:
- EPR labelling: concerns extended producer responsibility, i.e. registration and scheme participation. In Germany, LUCID registration and scheme participation remain in place — the Packaging Law Implementation Act (VerpackDG) replaced the Packaging Act on 12 August 2026 and changes nothing about the PPWR labelling dates. Whether an EPR mark goes on the packaging is governed by Art. 12(9) as an option (see above).
- Digital product passport: comes from the Ecodesign for Sustainable Products Regulation (ESPR), not from the PPWR, and concerns the product. The PPWR links the two at one point: where Union law requires a data carrier for the packaged product, “a single data carrier shall be used for providing the information required for the packaged product and for the packaging, and both shall be easily distinguishable” (Art. 12(5), fourth subparagraph). Legally separate requirements, one carrier.
- Deposit marking: packaging subject to a deposit and return system is exempt from the harmonised material label; packaging under systems per Art. 50(1) “shall be marked with a clear and unambiguous label”; in addition, a harmonised colour label from the implementing act may be added, which individual Member States may make mandatory provided this causes no internal-market distortions or trade barriers (para 1, fourth subparagraph). For other deposit systems national symbols remain permitted — and no Member State may prohibit another Member State’s deposit label (para 10).
- Labelling of waste receptacles (Art. 13): addresses the Member States, not those placing packaging on the market. By 12 August 2028 or 30 months from adoption of the corresponding implementing acts, receptacles for the collection of packaging waste must carry the harmonised labels — and these “shall correspond to the labelling for packaging as referred to in Article 12(6)”, except for deposit packaging. That explains why the two 2028 dates are often conflated in the market.
What makes sense now
Labelling is not the urgent topic — the acute effort sits with documentation, which has applied since 12 August 2026: see the PPWR declaration of conformity and the overview of deadlines and obligations. Four points from Article 12 can, however, be worked through now, because they are in the text and do not depend on the implementing act:
- Check existing logos (para 8): take stock of private sorting, recycling and sustainability symbols on artwork against the ban on misleading labels — it has been formally applicable since 12 August 2026 and is tied to packaging “for which harmonised labelling has been laid down in this Regulation”.
- Inventory recycled-content and biobased claims (para 4): every voluntary claim on recycled content or biobased plastic content must, from the deadline, follow the prescribed format; recycled-content claims additionally follow the methodology under Art. 7(8). Knowing where such claims sit lets you switch them as soon as the act is out.
- Separate compliance QR from marketing QR (para 5, third subparagraph): anyone planning QR codes on packaging today should keep sorting and compliance information apart from advertising content — the text prohibits displaying them together.
- Keep manufacture and import dates traceable per batch (para 12): the three-year grandfathering period is tied to the date of manufacture or import into the Union. That evidence must be available.
And one overlap that saves work: material composition per article is already part of the technical documentation today — and the same data later underpins material labelling. Capturing it now in a structured way, per component, largely covers labelling as well.
Labelling is a design and tooling topic with lead time; documentation is a data topic with a deadline. Both rest on the same foundation: dependable material data per packaging article, supplied by the supplier.
How that data gets collected from suppliers in a structured way is described on the page about PPWR software for documentation and reporting; packaging manufacturers who have to supply such data to their customers will find it under PPWR reporting for producers.
Sources & method
- Regulation (EU) 2025/40 (PPWR), published in the EU Official Journal on 22 Jan 2025, in force since 11 Feb 2025 — wording and deadlines taken directly from the regulation text, Articles 12, 13, 70 and 71. Official text via the Publications Office of the EU (publications.europa.eu, CELEX 32025R0040); for Art. 12(9) the English, German and French language versions were compared. Consolidated text cross-checked; none of the six corrigenda to the Regulation concerns Article 12.
- The concrete design of the harmonised label — pictograms, specifications, formats — is set by the Commission through an implementing act under Art. 12(6). Its deadline, 12 August 2026, has passed without the act appearing in the Official Journal (as of 8 Sept 2026); Envirotec Magazine reported the missed deadline on 19 Aug 2026. This article therefore reproduces no symbol or pictogram specifications.
- The dates 12 Aug 2028 (paras 1, 4) and 12 Feb 2029 (para 2) apply “whichever is the latest” against 24 or 30 months from entry into force of the implementing act — and move with it.
- European Commission PPWR guidelines and FAQ of 30 Mar 2026 (not legally binding).
- Germany: Packaging Law Implementation Act (VerpackDG), in force since 12 Aug 2026 — it replaces the German Packaging Act and changes nothing about the PPWR labelling dates.
- European Commission omnibus package of 10 Dec 2025: in June 2026 the Council of the EU did not continue deliberations on the PPWR simplifications. The labelling dates in the regulation are unchanged.
- Information as of 2 November 2026. This article is editorial guidance, not legal advice.
Frequently asked questions about PPWR labelling obligations
When does the PPWR labelling obligation apply?
Article 12 has three timelines. Harmonised material labelling applies from 12 August 2028 or 24 months from entry into force of the implementing acts — whichever is later (para 1). Reusable-packaging labelling from 12 February 2029 or 30 months later (para 2). And by 12 February 2027, packaging in an EPR scheme may be identified digitally — an option, not an obligation (para 9). Not on 12 August 2026: on that date the declaration of conformity and technical documentation became mandatory, not labelling. Because the Commission missed its deadline for the implementing act (12 August 2026), the 2028 and 2029 dates move back. One detail on para 9: the English text reads “By 12 February 2027”, the German “Ab dem 12. Februar 2027” (from), the French “Au plus tard le 12 février 2027” — all language versions are equally authentic; how the divergence is to be read is open.
Does the PPWR mandate a QR code on packaging?
Yes, in one case: reusable packaging must, from 12 February 2029 — or 30 months from entry into force of the implementing act — bear a QR code or other standardised, open, digital data carrier that informs about the re-use system and enables the counting of trips and rotations (Art. 12(2)). Two further cases are digital-only: if an EPR mark is applied — which is voluntary — it may be done only via a QR code or an equivalent standardised, open, digital-marking technology (para 9). Packaging containing substances of concern must be marked digitally; the methodology follows by implementing act (para 1, second subparagraph). It is voluntary as a supplement to the material label with sorting information per component (para 1, third subparagraph). There is no general QR obligation for every piece of packaging.
What does PPWR material labelling have to look like?
The Regulation sets the frame: the label “shall be based on pictograms and be easily understandable, including for persons with disabilities” (para 1), it is affixed, printed or engraved “visibly, legibly and firmly” (para 5), and in a language determined by the target market. The concrete pictograms, specifications and formats are set by the Commission through an implementing act (para 6). Its deadline — 12 August 2026 — has passed without the act appearing in the Official Journal (as of November 2026). Circulating symbol templates are therefore drafts, not requirements. The sensible move is to reserve space for labelling without committing to symbols.
What is the difference between PPWR labelling and the digital product passport?
Two regulatory strands with one statutory interface. PPWR labelling concerns the packaging — material composition, reusability, recycled content. The digital product passport comes from the Ecodesign for Sustainable Products Regulation (ESPR) and concerns the product. Art. 12(5), fourth subparagraph, PPWR connects the two: where Union law requires a data carrier for the packaged product, “a single data carrier shall be used for providing the information required for the packaged product and for the packaging, and both shall be easily distinguishable”. Two separate codes are then not envisaged.
Do LUCID registration and EPR scheme participation remain in place?
Yes. In Germany the Packaging Law Implementation Act (VerpackDG) replaced the Packaging Act on 12 August 2026; LUCID registration and EPR scheme participation remain in place as national structures. The VerpackDG changes nothing about the PPWR labelling dates.
What has to be on the packaging since 12 August 2026?
Nothing from Article 12 that would have to be printed on the packaging. What formally applies since that date: the prohibition on labels, symbols or inscriptions likely to mislead or confuse consumers about sustainability, packaging characteristics or waste management options — for packaging for which this Regulation lays down harmonised labelling (para 8). The previous material-identification rule in Art. 8(2) of Directive 94/62/EC continues to apply until 30 months after entry into force of the implementing act (Art. 70(1)(a)). The dates “12 August 2026” in paras 6 and 7 are deadlines for the Commission, not obligations on companies.
May packaging that is already printed still be used after the deadline?
Yes, under the grandfathering rule in Art. 12(12): packaging manufactured in the Union or imported before the respective deadline that does not meet the labelling criteria may be made available on the market until 3 years from entry into force of the labelling requirement. The reference date is manufacture or import, not the order — that evidence should be traceable per batch.